|
| 1 Port NMEA to WiFi Bridge |
| The 'Yakker' NMEA to WiFi Bridge allows you to transmit your NMEA data to all of your WiFi devices.
The Yakker creates it's own WiFi hot spot for your devices to connect to, or
the Yakker can connect to your onboard router, enabling your devices
to receive the data that way. The Yakker supports both UDP and TCP protocols |
|
|
| 2 Port NMEA to WiFi Bridge |
| The 'Yakker' 2 Port NMEA to WiFi Bridge allows you to connect 2 seperate NMEA devices and transmit your NMEA data to all of your WiFi devices.
The Yakker creates it's own WiFi hot spot for your devices to connect to, or
the Yakker can connect to your onboard router, enabling your devices
to receive the data that way. The Yakker supports both UDP and TCP protocols. |
|
|
| Bi-Directional NMEA to WiFi Bridge |
Enjoy the freedom of wireless navigation!
The 'YakBAK' Bi-Directional NMEA to WiFi Bridge allows you to transmit your
NMEA data to all of your WiFi devices. It can also send NMEA sentences back to
control your auto-Pilot.
The YakBAK creates it's own WiFi hot spot for your devices to connect to, or
the YakBAK can connect to your onboard router, enabling your devices
to receive the data that way. |
|
|
| 3 Port NMEA Combiner |
| Need to connect your AIS radio, GPS and other gear to your MFD or Chartplotter?
Introducing the YakMUX 3 Port NMEA 0183 Combiner with USB. This is the ultimate in easy to use NMEA combiners.
Just power it up, connect your NMEA devices and YakMUX starts doing it's thing. If you want to get all your
NMEA data into your navigation software on your PC then just plug the YakMUX into your PC/Tablet/Laptop with
the supplied USB cable and you're good to go, or you can connect to the PC's serial port by utilising one of
YakMUX's outputs. |
|